The sequential numbers required for the stationery are typically prepared in a spreadsheet such as Microsoft Excel and then exported as a txt or csv file for use with the Data Merge palette. However, a free script called Indys Number Generator written by Stanislav Antos can create sequential numbers without having to open any spreadsheet software. The script has been available for some time but I feel it is a hidden gem and definitely worth discussing.
So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
If you are still reading this then perhaps you are looking for a simple and reliable way to number a couple of lists in a Word document. If you read John's article then you have already been informed that field numbering is simple and robust. If you are like 9 out of 10 Word users in my office then anything more than 1. space space Blah, blah "enter" 2. space space Blah, blah ... defies simple! If that applies to you, then the "SeqField Numbering" Add-In presented later in this page is for you.
An awesome new feature to has been introduced to Microsoft Publisher 2010 is the ability to use Data Sources to create "Catalogue Pages". This is like a Mail Merge for design documents. Now, I would have to agree that Publisher isn't the best graphic design program in the market. But it's certainly adequate for simple ticket designs — for example, for a school social. Let's say we want each ticket to have a unique number and an inspiration quote. This is all possible through Publisher and a data source, e.g. an Excel Spreadsheet.

How do I set up the basic template for text numbering in Word 2008 for the Mac? Here is what is driving me nuts: I want to generate numbered lists - lots and lots of them. The first level numbered lines will have second level under them in many cases, also numbered and indented below the first level. The second level will also have third level under them, intended some more and also numbered. This "sort-of" works fine. It USED to work excellently. Here is what I do. I click the Numbering button in the Bullets and Numbering palette. The line indents and a 1) is aut...
Another master layer is created for the names of the weekdays, which are also common to all pages. The sequential position of the background and the weekdays is different, which is why two master layers are needed. The weekdays layer is sixth from the bottom in the sequence of layers. This master layer must be placed on top of all layers (Figure 9).
Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.
In the example I explained, I was using a list, but did it with un-linked text boxes using “continue from previous number” and “continue numbers across stories.” I’m guessing that there is no way to tell InDesign that even though there are 4 text boxes on the page, that there are two different lists? I’d probably have to just create two threaded stories for that scenario to work.

In the example I explained, I was using a list, but did it with un-linked text boxes using “continue from previous number” and “continue numbers across stories.” I’m guessing that there is no way to tell InDesign that even though there are 4 text boxes on the page, that there are two different lists? I’d probably have to just create two threaded stories for that scenario to work.
If you need to apply numbering within a paragraph rather than to the entire paragraph, you use Word's ListNum feature. Using the ListNum feature will allow you to take advantage of the numbering system you're currently using in your document (it will use the one you implemented most recently if you're not currently using a numbering system). The ListNum Field is available in Word 97 and later and interacts with multi-level list numbering (which should be linked to styles as set forth here). Here is a brief explanation of differences between the ListNum field and the Seq field.
Hello! I would like to chart varying salaries against specific Low, middle and high numbers. Any suggestions on how to show this? Example: Salary 1 10000 Salary 2 12000 Salary 3 16000 Low 9000 Mid 15000 High 19000 THANK YOU! Do you want the Low-Mid-High values to be like a benchmark to measure salaries against? You could put horizontal lines across your chart, and use markers for the salary data. Here' a few ways to get your lines: http://peltiertech.com/Excel/Charts/AddLine.html - Jon ------- Jon Peltier, Microsoft Excel MVP Peltier Technical Services Tutorials...

If you start to type in what appears to be a numbered list, Word formats your manually typed "numbers" to an automatic numbered list. The main benefit of this option is that you do not need to click any button to start numbering and you can choose your numbering style as well. For example, if you type "(a) some text" and press Enter, it starts numbering using the "(a)" format.
I need a running number from 1001-1200, so after I apply the print merge, it creates 200pgs of the voucher.When I try to save this file, it takes almost half an hour to do so.I think this is due to the heavy file size?In addition, the local print shop knows nothing about print merge and imposition, so I have to prepare the artwork readily in A3 size to print.The imposition creates a 10pgs files.I wanted to save this as PDF to preserve the color, but it turned out to be a nightmare (in daytime) for me that it takes more than2 hours to generate the 10pgs PDF.
However, what I want it to do now, instead of just putting the number into the attribute value, I want the number to be a suffix to the existing default tag value of the tag named "ID" which is "ADDRESS:" for some blocks and "ELEVATION:" for other blocks but the tag name that the routine always has to filter for is "ID". That way the user can pick anywhere on the block - not being forced to pick the tag we want to add numbers to.

However, what I want it to do now, instead of just putting the number into the attribute value, I want the number to be a suffix to the existing default tag value of the tag named "ID" which is "ADDRESS:" for some blocks and "ELEVATION:" for other blocks but the tag name that the routine always has to filter for is "ID". That way the user can pick anywhere on the block - not being forced to pick the tag we want to add numbers to. document numbering

×