However, what I want it to do now, instead of just putting the number into the attribute value, I want the number to be a suffix to the existing default tag value of the tag named "ID" which is "ADDRESS:" for some blocks and "ELEVATION:" for other blocks but the tag name that the routine always has to filter for is "ID". That way the user can pick anywhere on the block - not being forced to pick the tag we want to add numbers to.
we have printed AP checks using the check number from 0000000001 to 0000000006, but we havent posted those batches. we have only one checbook. Now can we restart the check number from 000001. Then do we need to delete the previous batches for checks printed. What is the best approach in this regard. Thanks in Advance, Arun. In the Post Payables Checks batch window (Transactions > Purchasing > Post Checks), choose the batch in question, then select Reprint Checks from the drop-down list. Enter 000001 for your starting check number. You will also need to go ...

Tip: Normally, the visibility and printability should be enabled or disabled together. Remember, a visible layer cannot be printed or exported if printability is disabled, and a non-visible layer can be printed and exported if printability is enabled. A layer that is visible but non-printable can be used to keep notes with the file. I use such a layer to keep the print details and other job information, so that I can refer to them at any time.
Warning  Making even minor changes to an outline numbering scheme won't necessarily change the initial position you've selected in the gallery, but rather may create a new gallery position, overwriting an existing one. Because of this problem, attaching numbering to styles is strongly recommended. This is covered in greater detail later in this chapter and in the chapter on Styles.
I am trying to use mailmerge to print tickets. I tried using a column of sequential numbers on a spreadsheet and inserting that as a field into the mailmerge, but oddly, it used number 8 eight times on the first page, number 16 eight times on the second page, etc. So, I tried using a sequencing field as you describe. It worked great for the first page (numbers 1-8) but when I completed the mailmerge, it repeated numbers 1-8 on each successive sheet. What do I have to do to make this work in a mailmerge?
I have a word document with a table of 6 exact cells on a full page table. In those cell areas I have been printing tickets with a list and a mail merge and updating labels. I call to an excel list of 1-2000 and then I generate all the pages through the Finish and Merge option. This all works perfect. I get 2000 individually numbered tickets to print...however...I then have six tickets printed on a page of paper with ticket numbers 1, 2, 3, 4, 5 ,6 then the next page has 7,8,9,10,11,12. This is fine but I then have to cut and stack these tickets in groups of six and at that point none of the numbering is sequential. The tickets are basically random. 

i’ve had to do tons of this lately and found that for the amounts of tickets being done (e.g. 7000 x 10 tickets + cover & mailer) that chuckT’s solution almost 2 years ago is similar to what i use. would be interested to know if others doing similar VDP are using a wholly indesign/excel solution, or if specific VDP software such as XMPie are being used.

Hi, I am creating a process map in Visio, is it possible to get Visio to number my boxs on my flowchart. At the moment I create the shape, put the text in but I have to manually put the number before the text, can visio do this automatically. Thanks Glenn In Visio 2003, try Tools > Add-ons > Visio Extras > Number Shapes. The same feature can be found in previous versions under Tools > Macros. -- Mark Nelson Microsoft Corporation This posting is provided "AS IS" with no warranties, and confers no rights. "Glenn Robertson"

Note  If TAB and SHIFT+TAB do not work for changing the indents for outline numbering, you probably have the option Tabs and Backspace set left Indent turned off. To change this setting, from the Tools menu, choose Options. Select the Edit tab and check the option Tabs and backspace set left indent. As an alternative to turning this option on, you can instead use ALT+SHIFT+LEFT ARROW or RIGHT ARROW to increase or decrease outline numbering.


I want to a sequential number to fill in automatically each time the form is filled out. Malissa, A simple way would be to use something like this, you could assign it to a button, an open or before print event. Sheets("Sheet1").Range("A1").Value = _ Sheets("Sheet1").Range("A1").Value + 1 For other ways to do this or if this is going to be used in a temple have a look here http://www.mcgimpsey.com/excel/udfs/sequentialnums.html -- Paul B Always backup your data before trying something new Please post any response to the newsgroups so others...
I am trying to use mailmerge to print tickets. I tried using a column of sequential numbers on a spreadsheet and inserting that as a field into the mailmerge, but oddly, it used number 8 eight times on the first page, number 16 eight times on the second page, etc. So, I tried using a sequencing field as you describe. It worked great for the first page (numbers 1-8) but when I completed the mailmerge, it repeated numbers 1-8 on each successive sheet. What do I have to do to make this work in a mailmerge?

we have printed AP checks using the check number from 0000000001 to 0000000006, but we havent posted those batches. we have only one checbook. Now can we restart the check number from 000001. Then do we need to delete the previous batches for checks printed. What is the best approach in this regard. Thanks in Advance, Arun. In the Post Payables Checks batch window (Transactions > Purchasing > Post Checks), choose the batch in question, then select Reprint Checks from the drop-down list. Enter 000001 for your starting check number. You will also need to go ...
Hi Silver, Try going to File/Page Setup/Header-Footer/Custom Header/Should be the button shown in the header box with the # sign in it. Larry -- keithl816 ------------------------------------------------------------------------ keithl816's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=21287 View this thread: http://www.excelforum.com/showthread.php?threadid=498476 ...
Hello, I'm looking for a way to quickly find what numbers are missing in column B. I can sort them ascending, but how do I find if there are missing numbers? 1 2 3 5 6 7 9 I need to know 4 and 8 are missing. Thank you. One way: select B2:Bx. Choose Format/Conditional Formatting... CF1: Formula is =(B2-B1)>1 Format1: / or, without sorting, select column B (with B1 active): CF1: Formula is =AND(B1>MIN(B:B),COUNTIF(B:B,B1-1)=0) Both CF's will activate if there are missing numbers before them. In article <28706E9E-2624...
Before you complete the merge, preview the merge results to make sure that the tracking numbers will display as you want them to in your publications. You can preview the merge in two ways: While you are refining the layout to review the layout of the individual coupon or gift certificate, or when you are getting ready to print, to preview the arrangement of coupons or gift certificates on the printed sheet.
we have printed AP checks using the check number from 0000000001 to 0000000006, but we havent posted those batches. we have only one checbook. Now can we restart the check number from 000001. Then do we need to delete the previous batches for checks printed. What is the best approach in this regard. Thanks in Advance, Arun. In the Post Payables Checks batch window (Transactions > Purchasing > Post Checks), choose the batch in question, then select Reprint Checks from the drop-down list. Enter 000001 for your starting check number. You will also need to go ...
For the calendar job, I've used two master layers and four local layers. To create a master layer, click the New Master Layer (all pages) button at the bottom of the Object Manager docker. Objects placed on this master layer will appear on all pages of your design. Then, create the required number of regular or local layers (in this case, four) by clicking the New Layer button. You now have one page ready.
Yes it can be used for other documents. I use it as a basis to generate addressed letters to clients etc. Potentially you could use it with Access, but you’d have to set it up as a Mail-Merge document – but it would take a bit of fiddling around to get both mail-merge and the sequential numbering to work at the same time. it’s a matter of experimenting – I don’t have any other suggestions – it’s up to you to adapt it to your own needs.

I would like to number a voucher book, i have place 4 vouchers on a page, the thing is that i want each of these vouchers to start with different number, 100, 200, 300, 400, and then i want to number them 99 times. The problem is that they have to be numbered only 1 per page, so that when i have printed them all i can easily crop them and staple them right up with having to go through it all.

i’ve had to do tons of this lately and found that for the amounts of tickets being done (e.g. 7000 x 10 tickets + cover & mailer) that chuckT’s solution almost 2 years ago is similar to what i use. would be interested to know if others doing similar VDP are using a wholly indesign/excel solution, or if specific VDP software such as XMPie are being used.
×