* The solution assumes that there is only one stack to cut, but really there could be dozens of stacks. Take a run of the numbers 1-10000 for example. Let’s say you get 4-up on a sheet and the biggest stack that will fit in the guillotine is 500 sheets. A true cut and stack solution will print on the first stack 1-500, 501-1000, 1001-1500, 1501-2000. Ideal because the numbers can be guillotined and placed back onto a pallet for its next process. It also means I can provide these numbers first to the client and then they can wait for the other numbers (in case they had run out of stock and were in a hurry for replenishment stock). The solution doesn’t do that – instead, the first 500 stack will have the numbers 1-500, 2501-3000, 5001-5500, 7501-8000. That means not only is placement back onto the pallet confusing, but the customer has to wait for the artwork to be completely printed before even getting the first half of numbers. True, I could run the script several times to get the appropriate stacks, but why should I if the script did what I wanted? Especially if there are hundreds of stacks to print?
Good morning! Directions are clear for sure but when i go to merge the first ticket is one but the second number on the raffle ticket is two. i have four raffle tickets per page the first three are messed up but the forth is correct all the way down to 500. Any ideas? i have tried with a header and without a header. i even made the first number with a formula. it does work with out putting next record but like you said it is four tickets with the same number and that would use a ton of ink. Any help would be greatly appreciated.
Instead of working harder than you need to, insert a one-column table with as many rows as necessary to accommodate your list. Then, using Word's numbering feature, number that column. Finally, convert the table to text. The resulting list is a fixed numbered list, so you'll have to live with its limitations; when you can do so, this method definitely beats most alternative solutions.
Creating a sequential list of numbers, in Word, sounds like an intimidating task. Sure, you can create a numbered list quickly enough, but that feature works with additional text - you're numbering something. If you want a list of just numbers, you have to work a bit harder. Word's SEQ field might come to mind, but that solution is better suited to template-type numbering. In order words, this field works great if you're numbering documents, labels, and so on. It doesn't work so well if you just want to create a list of sequential numbers. You can use it that way, but it'll be more work than it's worth.
Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.
Word's Numbering Explained by John McGhie, MVP - comprehensive and not pretty (Downloadable pdf file in letter size) - Reading this is vital to anyone attempting to use automatic numbering or bullets in a law office setting or other places where the documents are likely to be reused or heavily edited. See also How to Create a Template with a downloadable template with style-based numbering. I strongly recommend that you read both of these before doing anything with the contents of this chapter.
GREAT tip with lots of uses! Thank you. This will save me hours of work on some tickets I’m designing. However, I also need to set up table tents that have numbers on them. They’re 2-up, and are folded, so each number needs to appear twice on the same page. In short, I want a page with 1/1 and 2/2, and I’m getting 1/2 and 3/4. Am I missing an obvious fix? Thank you.
The Renumber/Refresh List toolbar command is used to renumber an existing numbered list or to refresh a list after editing. For example if item 3. is deleted from a list by editing then you can use this tool to refresh the list. You can also use the Renumber/Refresh command to number or renumber a selection of list paragraphs with any chosen starting number.
How do I set up the basic template for text numbering in Word 2008 for the Mac? Here is what is driving me nuts: I want to generate numbered lists - lots and lots of them. The first level numbered lines will have second level under them in many cases, also numbered and indented below the first level. The second level will also have third level under them, intended some more and also numbered. This "sort-of" works fine. It USED to work excellently. Here is what I do. I click the Numbering button in the Bullets and Numbering palette. The line indents and a 1) is aut...
As you can see, the sequence name can be most anything (e.g. mySeq, A, B, or Bob's_your_uncle). If you start a sequence with a new sequence name the numbering restarts with 1. Look at Mary's first chore in the right hand column. Here you see the reset switch \r1 was used. This switch directs Word to restart the sequence named "A" with "1" at this point.
Hello Bruce, I seem to be having a different problem altogether. I created my ticket in word using logos and text boxes as needed, ticket looks great. I followed your very clear instructions but when I did the Finish & Merge I got this message, "You cannot include DATA, NEXT, NEXTIF, or SKIPIF fields in comments, headers, footers, footnotes or endnotes." I then click on OK and get this, "A field calculation error occurred in record 1. Bruce any help would be much appreciated. Thank you!!
Word's numbering feature is easy to use, but it doesn't work in all situations. For instance, it can't handle an inline number sequence. By inline, I mean a sequence of numbers positioned within regular text. Fortunately, the SEQ field code handles these situations. I'll start by showing you how to insert the SEQ field code manually, for those one-time occurrences. If you use this feature often, you'll want to add AutoCorrect items for quick insertion into your text. So we'll look at that, too.
Hello! I would like to chart varying salaries against specific Low, middle and high numbers. Any suggestions on how to show this? Example: Salary 1 10000 Salary 2 12000 Salary 3 16000 Low 9000 Mid 15000 High 19000 THANK YOU! Do you want the Low-Mid-High values to be like a benchmark to measure salaries against? You could put horizontal lines across your chart, and use markers for the salary data. Here' a few ways to get your lines: http://peltiertech.com/Excel/Charts/AddLine.html - Jon ------- Jon Peltier, Microsoft Excel MVP Peltier Technical Services Tutorials...
Yes, I’m a little confused by your brief too. The script that I describe here will create an array of numbers using any step value that it offers, including by 1 number each time. Whether you put the resulting list directly into InDesign as text, or indirectly using the Data Merge feature is up to you. Perhaps learn more about the Data Merge feature of InDesign itself – David Blatner has a great series on Lynda.com that will explain Data Merge much more than I can on this thread.