Note  If TAB and SHIFT+TAB do not work for changing the indents for outline numbering, you probably have the option Tabs and Backspace set left Indent turned off. To change this setting, from the Tools menu, choose Options. Select the Edit tab and check the option Tabs and backspace set left indent. As an alternative to turning this option on, you can instead use ALT+SHIFT+LEFT ARROW or RIGHT ARROW to increase or decrease outline numbering.

GREAT tip with lots of uses! Thank you. This will save me hours of work on some tickets I’m designing. However, I also need to set up table tents that have numbers on them. They’re 2-up, and are folded, so each number needs to appear twice on the same page. In short, I want a page with 1/1 and 2/2, and I’m getting 1/2 and 3/4. Am I missing an obvious fix? Thank you.


I know that I can select all of the clips and then move the play head to approx 1/10 of a second and split the clips. This works except I have to go through and manually delete the bits I don't want which is tedious enough for a video with 82 images but I am planning on longer projects, doing it manually would be a nightmare. Also I could probably re-order the images manually but I am sure that there must be an easier.
If you start to type in what appears to be a numbered list, Word formats your manually typed "numbers" to an automatic numbered list. The main benefit of this option is that you do not need to click any button to start numbering and you can choose your numbering style as well. For example, if you type "(a) some text" and press Enter, it starts numbering using the "(a)" format.
I use a template for all my drawings that includes a page number in the lower right hand corner (usually says "Page 1 of 4" for example). I usually edit this number manually, which is fine for documents with a small amount of pages, but if I'm working on a large document (50+ pages) and need to re-order some pages it means editing the page number on every page manually.
I am curently working on a larger projekt, where we have aprox. 4500 pcs.of furnituer designed in 4 different kind of families, generic, furnituer, furnituer systems and specialty equipment. We need to be able to asign every  pcs.of funituer a seqventual serial number, we have tried to do this using an extension with a funktion called element positionerning, but we have had no success with this tool, apparently it is taking up to much memory.
* The solution assumes that there is only one stack to cut, but really there could be dozens of stacks. Take a run of the numbers 1-10000 for example. Let’s say you get 4-up on a sheet and the biggest stack that will fit in the guillotine is 500 sheets. A true cut and stack solution will print on the first stack 1-500, 501-1000, 1001-1500, 1501-2000. Ideal because the numbers can be guillotined and placed back onto a pallet for its next process. It also means I can provide these numbers first to the client and then they can wait for the other numbers (in case they had run out of stock and were in a hurry for replenishment stock). The solution doesn’t do that – instead, the first 500 stack will have the numbers 1-500, 2501-3000, 5001-5500, 7501-8000. That means not only is placement back onto the pallet confusing, but the customer has to wait for the artwork to be completely printed before even getting the first half of numbers. True, I could run the script several times to get the appropriate stacks, but why should I if the script did what I wanted? Especially if there are hundreds of stacks to print?
A note about link exchanges. This site does not participate in link exchanges to build web presence. If you have a link that you think would be of use to people reading this page, please send it to the webmaster with the url of the page where you think it should appear and it will be considered. Your placing a link to this site will not affect the decision on whether to add your link, though.
You can change the numbers in the list by restarting the sequence or by specifying a new start number. You can change the list's style. You can do anything to this list that you can do to a normal numbered list because it is a numbered list, with one exception: the list, while easy to format, is fixed. If you delete an item, the list updates accordingly, but I haven't found a way to add numbers.

Thank you for these instructions!! I'm using them to auto number my son's baseball team raffle tickets which we hand numbered last year (UGH!). I followed the instructions exactly but for some reason the numbering is starting at 2 every time. I did deselect the checkbox about the column headers which seems the obvious culprit. Any ideas? I'm using Word on a PC. Thanks!!
One of the easiest ways to begin applying numbers is by starting to type a numbered list. Word recognizes that you are creating a list and responds accordingly by converting text that you type into numbered items. The number scheme, delimiter characters that mark the beginning or end of a unit of data and formatting are all based on what you have typed.
The auto-indenting feature of bullets and lists has always frustrated me. EVERY time you apply a numbered or bulleted list, you've got to set the indents. I want my lists to be indented at the very left of the page, flush with the rest of the paragraphs. But no, Microsoft insists that you want them indented by 0.63cm and hanging at 1.27cm (WHY 0.63? Why not 0.7? Or 1.0cm? But that's a question for a different session.) (I know, it's because MS is American and still uses inches etc...)
I am using your instructions to create a page of tickets - the design has been created as a picture so I added a text box to "hold" the mail merge instructions but I keep getting the error message "You cannot include DATA, NEXT, NEXTIF, or SKIPIF fields in comments, headers, footers, footnotes or endnotes." I have not included any of these but I'm wondering if it's because I've attempted to insert it in a text box. Is there an easy way to do this? TIA
A3 is the result of A1/21 I want to bracket the number in A4 In MSWorks I would type the statement ="["&string(A3,0)&"]" In excel I get in some cells [1.436871259834] I'd like it to read [1] Help please. -- rodney@touch88gum.com.au (Remove gum to reply) Rodney, ="["&ROUND(A3,0)&"]" -- HTH, Bernie MS Excel MVP "Rodney" wrote in message news:OkME4oGVEHA.2564@TK2MSFTNGP11.phx.gbl... > A3 is the result of A1/21 > I want to bracket the number in A4 > In MSWorks I would type th...
I use a template for all my drawings that includes a page number in the lower right hand corner (usually says "Page 1 of 4" for example). I usually edit this number manually, which is fine for documents with a small amount of pages, but if I'm working on a large document (50+ pages) and need to re-order some pages it means editing the page number on every page manually.
The process described in this tip works best if you have a single list in your document. Note that the sequence field starts at the beginning of the document and numbers through the whole document, based on the identifier you use. If you are going to have multiple lists in your document, then you can add a second AutoText entry to help with this. The only difference in the above steps is that the SEQ field you define would look like this:
Word includes a special sequencing field that you can use to do all sorts of numbering. You can even use the SEQ field to help create broken numbered lists. (A broken numbered list is one in which the flow of the list is interrupted by paragraphs of a different format.) This approach to creating numbered lists is particularly helpful and much less prone to the problems inherent in Word's built-in list numbering. For the purposes of this tip, the format of the sequence field is as follows:

Good morning! Directions are clear for sure but when i go to merge the first ticket is one but the second number on the raffle ticket is two. i have four raffle tickets per page the first three are messed up but the forth is correct all the way down to 500. Any ideas? i have tried with a header and without a header. i even made the first number with a formula. it does work with out putting next record but like you said it is four tickets with the same number and that would use a ton of ink. Any help would be greatly appreciated.
The sequential numbers required for the stationery are typically prepared in a spreadsheet such as Microsoft Excel and then exported as a txt or csv file for use with the Data Merge palette. However, a free script called Indys Number Generator written by Stanislav Antos can create sequential numbers without having to open any spreadsheet software. The script has been available for some time but I feel it is a hidden gem and definitely worth discussing.
×