The process described in this tip works best if you have a single list in your document. Note that the sequence field starts at the beginning of the document and numbers through the whole document, based on the identifier you use. If you are going to have multiple lists in your document, then you can add a second AutoText entry to help with this. The only difference in the above steps is that the SEQ field you define would look like this:


Remember that you must update the values in the sheet if you want to continue the numbering series with the next batch of tickets. For instance, if you want your next batch of tickets to start with 112, you'd open the workbook and change the value 100 to 112, and update the remaining values accordingly. Don't forget to save the workbook after updating the values.
Hello! I would like to chart varying salaries against specific Low, middle and high numbers. Any suggestions on how to show this? Example: Salary 1 10000 Salary 2 12000 Salary 3 16000 Low 9000 Mid 15000 High 19000 THANK YOU! Do you want the Low-Mid-High values to be like a benchmark to measure salaries against? You could put horizontal lines across your chart, and use markers for the salary data. Here' a few ways to get your lines: http://peltiertech.com/Excel/Charts/AddLine.html - Jon ------- Jon Peltier, Microsoft Excel MVP Peltier Technical Services Tutorials...
As you can see, the sequence name can be most anything (e.g. mySeq, A, B, or Bob's_your_uncle). If you start a sequence with a new sequence name the numbering restarts with 1. Look at Mary's first chore in the right hand column. Here you see the reset switch \r1 was used. This switch directs Word to restart the sequence named "A" with "1" at this point.
The auto-indenting feature of bullets and lists has always frustrated me. EVERY time you apply a numbered or bulleted list, you've got to set the indents. I want my lists to be indented at the very left of the page, flush with the rest of the paragraphs. But no, Microsoft insists that you want them indented by 0.63cm and hanging at 1.27cm (WHY 0.63? Why not 0.7? Or 1.0cm? But that's a question for a different session.) (I know, it's because MS is American and still uses inches etc...)
Hi, I am creating a process map in Visio, is it possible to get Visio to number my boxs on my flowchart. At the moment I create the shape, put the text in but I have to manually put the number before the text, can visio do this automatically. Thanks Glenn In Visio 2003, try Tools > Add-ons > Visio Extras > Number Shapes. The same feature can be found in previous versions under Tools > Macros. -- Mark Nelson Microsoft Corporation This posting is provided "AS IS" with no warranties, and confers no rights. "Glenn Robertson"
Tip: Normally, the visibility and printability should be enabled or disabled together. Remember, a visible layer cannot be printed or exported if printability is disabled, and a non-visible layer can be printed and exported if printability is enabled. A layer that is visible but non-printable can be used to keep notes with the file. I use such a layer to keep the print details and other job information, so that I can refer to them at any time.
Word's numbering feature is easy to use, but it doesn't work in all situations. For instance, it can't handle an inline number sequence. By inline, I mean a sequence of numbers positioned within regular text. Fortunately, the SEQ field code handles these situations. I'll start by showing you how to insert the SEQ field code manually, for those one-time occurrences. If you use this feature often, you'll want to add AutoCorrect items for quick insertion into your text. So we'll look at that, too.
Is there a way to do this: I have a form called "List of Proposals Written" that is listed by th Proposal number. Is there a way to display on another excel spreadsheet, the mos current Proposal number? I know Access you use something like Dmax(ProposalID)+1 What should I do in Excel:confused: Any help would be greatly appreciated! Michae -- Message posted from http://www.ExcelForum.com "daniels012 >" < wrote > I have a form called "List of Proposals Written" that is listed by the > Propos...
Is there a way to do this: I have a form called "List of Proposals Written" that is listed by th Proposal number. Is there a way to display on another excel spreadsheet, the mos current Proposal number? I know Access you use something like Dmax(ProposalID)+1 What should I do in Excel:confused: Any help would be greatly appreciated! Michae -- Message posted from http://www.ExcelForum.com "daniels012 >" < wrote > I have a form called "List of Proposals Written" that is listed by the > Propos...
See Word's Numbering Explained by John McGhie, MVP - comprehensive and not pretty (Downloadable pdf file in letter size) - Reading this is vital to anyone attempting to use automatic numbering or bullets in a law office setting or other places where the documents are likely to be reused or heavily edited. See also How to Create a Template with a downloadable template with style-based numbering.
Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.
Warning  Making even minor changes to an outline numbering scheme won't necessarily change the initial position you've selected in the gallery, but rather may create a new gallery position, overwriting an existing one. Because of this problem, attaching numbering to styles is strongly recommended. This is covered in greater detail later in this chapter and in the chapter on Styles.
Creating a sequential list of numbers, in Word, sounds like an intimidating task. Sure, you can create a numbered list quickly enough, but that feature works with additional text - you're numbering something. If you want a list of just numbers, you have to work a bit harder. Word's SEQ field might come to mind, but that solution is better suited to template-type numbering. In order words, this field works great if you're numbering documents, labels, and so on. It doesn't work so well if you just want to create a list of sequential numbers. You can use it that way, but it'll be more work than it's worth.

GREAT tip with lots of uses! Thank you. This will save me hours of work on some tickets I’m designing. However, I also need to set up table tents that have numbers on them. They’re 2-up, and are folded, so each number needs to appear twice on the same page. In short, I want a page with 1/1 and 2/2, and I’m getting 1/2 and 3/4. Am I missing an obvious fix? Thank you.


we have printed AP checks using the check number from 0000000001 to 0000000006, but we havent posted those batches. we have only one checbook. Now can we restart the check number from 000001. Then do we need to delete the previous batches for checks printed. What is the best approach in this regard. Thanks in Advance, Arun. In the Post Payables Checks batch window (Transactions > Purchasing > Post Checks), choose the batch in question, then select Reprint Checks from the drop-down list. Enter 000001 for your starting check number. You will also need to go ...
Tip  Follow the same steps (above) to create Request for Production or Request for Admissions. The only difference would be in Step 3, you would change the "rog" to "rpf" or "rfa". This will keep unique numbering schemes running in the same document. Therefore, you could have an Interrogatory No.1 as well as Request for Production No.1. Keep in mind that if you cut, copy or paste sequence codes, you'll need to select them and press F9 to update the field codes. They do not update automatically. raffle ticket numbering
×