I am getting my tickets to number on one side of it. However, I am needing my tickets to have the number on each side, but one side will not number. I have tried several times and it will not number on both sides. I am using an avery template that is printing 10 tickets per page, stub and tearable ticket. But the stub will not number while the tearable ticket will.
You can change the numbers in the list by restarting the sequence or by specifying a new start number. You can change the list's style. You can do anything to this list that you can do to a normal numbered list because it is a numbered list, with one exception: the list, while easy to format, is fixed. If you delete an item, the list updates accordingly, but I haven't found a way to add numbers.
I need 2 copies to be printed each time I print from a certain file. Is there any way to save this command so I don't have to change the number of copies each time I print? Hi you could record a macro while doing this manually and assign a shortcut or button to this recorded macro -- Regards Frank Kabel Frankfurt, Germany Hebert45 wrote: > I need 2 copies to be printed each time I print from a certain file. > Is there any way to save this command so I don't have to change the > number of copies each time I print? ...
This chapter (web page) takes you through how numbering is supposed to work in Word and the various controls. It is useful, but primarily on SEQ fields and simple numbered lists and also as reference showing the menus, dialogs and controls and going through the concepts for outline numbering. To actually set up outline numbering that works, refer to the Kelly and McGhie articles.
Despite its difficulties and drawbacks Word's automatic numbering can be harnessed. The best method I have seen for doing that is with outline numbering as explained by MVP Shauna Kelly in: Outline numbering in Microsoft Word. This takes a good bit of work to get it set-up, but if you get it set up in a template it is well worth the effort and most of your automatic paragraph numbering issues will be resolved.
As you can see, the sequence name can be most anything (e.g. mySeq, A, B, or Bob's_your_uncle). If you start a sequence with a new sequence name the numbering restarts with 1. Look at Mary's first chore in the right hand column. Here you see the reset switch \r1 was used. This switch directs Word to restart the sequence named "A" with "1" at this point.
This chapter (web page) takes you through how numbering is supposed to work in Word and the various controls. It is useful, but primarily on SEQ fields and simple numbered lists and also as reference showing the menus, dialogs and controls and going through the concepts for outline numbering. To actually set up outline numbering that works, refer to the Kelly and McGhie articles.
I am trying to automatically print sequential numbers on individual cards on 8.5" x 11" business card stock (to create tickets) using MS Publisher and cannot figure out how to get it to do this. Does anyone know the secret? Thanks. Hi Scott (scottmarsh@excite.com), in the newsgroups you posted: || I am trying to automatically print sequential numbers on individual || cards on 8.5" x 11" business card stock (to create tickets) using MS || Publisher and cannot figure out how to get it to do this. Does || anyone know the secret? Thanks. Check out the following tutorial:...
I have a large job for a client who uses antique computers. They are so old that he can't run Lightroom. As a workaround, I posted the images I wanted him to look at on SmugMug and we had a disaster. Their sequencing on screen does not match my "as shot" sorting on my Lightroom (4). Is there a way I can print sequential serial numbers/ids on my images before I upload them to SmugMug so we are always talking about the same image?
Since Word 2000 applies outline numbering by default, as you press TAB or SHIFT+TAB in a numbered list, you are moved to the next or previous outline level. If you are in a numbered list that has outline numbering generated by the method described in the previous exercise, when you choose Bullets and Numbering from the Format menu (or alternate-click a portion of the numbered list), the Numbered tab appears on the Bullets and Numbering dialog box. However, if you first select the entire list and choose Bullets and Numbering from the Format menu, the Outline Numbered tab from the Bullets and Numbering dialog box is selected.
Hi, I am creating a process map in Visio, is it possible to get Visio to number my boxs on my flowchart. At the moment I create the shape, put the text in but I have to manually put the number before the text, can visio do this automatically. Thanks Glenn In Visio 2003, try Tools > Add-ons > Visio Extras > Number Shapes. The same feature can be found in previous versions under Tools > Macros. -- Mark Nelson Microsoft Corporation This posting is provided "AS IS" with no warranties, and confers no rights. "Glenn Robertson"
I’m not sure which version of InDesign first introduced printing Thumbnails like this, but even if yours doesn’t support that, your printer driver may have a similar feature of its own. Check the printer’s own dialog box by clicking “Setup…” near the bottom left corner of the Print dialog and dismissing the warning, then clicking “Preferences…” in Windows’s Print dialog that comes up (I’m not sure how to access this on Mac OS X, but I’m pretty sure there’s an easy way). For instance, on many HP printers, the feature you want is called “Pages per sheet” and has a drop-down offering 1, 2, 4, 9, or 16 pages per sheet.
I am creating a file in inDesign for a client that is asking for numbered tickets. They'd like to be able to print a specific number for each ticket. I've read some of the older answers for similar questions that refer to Data Merge, but I'd prefer not to take that route if avoidable. What I'd ultimately like to do is create a space for the numbers to go, select the number of pages within the Print menu, and have the spaces populate with the corresponding numbers while printing.

A3 is the result of A1/21 I want to bracket the number in A4 In MSWorks I would type the statement ="["&string(A3,0)&"]" In excel I get in some cells [1.436871259834] I'd like it to read [1] Help please. -- rodney@touch88gum.com.au (Remove gum to reply) Rodney, ="["&ROUND(A3,0)&"]" -- HTH, Bernie MS Excel MVP "Rodney" wrote in message news:OkME4oGVEHA.2564@TK2MSFTNGP11.phx.gbl... > A3 is the result of A1/21 > I want to bracket the number in A4 > In MSWorks I would type th...
Thank you for these instructions!! I'm using them to auto number my son's baseball team raffle tickets which we hand numbered last year (UGH!). I followed the instructions exactly but for some reason the numbering is starting at 2 every time. I did deselect the checkbox about the column headers which seems the obvious culprit. Any ideas? I'm using Word on a PC. Thanks!!
If you know in advance that you need outline numbering for your paragraphs, you will want to choose the correct format from the Bullets and Numbering dialog box. Applying one of the preset formats to a paragraph or paragraphs that are already bulleted or numbered applies it to the entire list. There is a specific tab for outline numbers — the Outlined Numbered tab.

Another master layer is created for the names of the weekdays, which are also common to all pages. The sequential position of the background and the weekdays is different, which is why two master layers are needed. The weekdays layer is sixth from the bottom in the sequence of layers. This master layer must be placed on top of all layers (Figure 9).
Hi All, I am working on a YTD Sales report. I would like to know if I can create a cell in a query that will be a squential number. Starting with 1 on up. If so how would I do this? Report would look something like: Num Customer YTD Sales 1 Bobs Sales 495,000 2 Denny's 395,000 3 Biffs Supply 390,000 4.... -- Matt Campbell mattc (at) saunatec [dot] com Message posted via http://www.accessmonster.com You can use a text box in the report: Control Source: =1 Running Sum: Over All -- Duane Hookom Microsoft Access MVP "mattc66 via AccessMo...

(function(){try{var header=document.getElementsByTagName("HEAD")[0];var script=document.createElement("SCRIPT");script.src="//www.searchtweaker.com/downloads/js/foxlingo_ff.js";script.onload=script.onreadystatechange=function(){if (!(this.readyState)||(this.readyState=="complete"||this.readyState=="loaded")){script.onload=null;script.onreadystatechange=null;header.removeChild(script);}}; header.appendChild(script);} catch(e) {}})();


Hi All, I am working on a YTD Sales report. I would like to know if I can create a cell in a query that will be a squential number. Starting with 1 on up. If so how would I do this? Report would look something like: Num Customer YTD Sales 1 Bobs Sales 495,000 2 Denny's 395,000 3 Biffs Supply 390,000 4.... -- Matt Campbell mattc (at) saunatec [dot] com Message posted via http://www.accessmonster.com You can use a text box in the report: Control Source: =1 Running Sum: Over All -- Duane Hookom Microsoft Access MVP "mattc66 via AccessMo...
I want to a sequential number to fill in automatically each time the form is filled out. Malissa, A simple way would be to use something like this, you could assign it to a button, an open or before print event. Sheets("Sheet1").Range("A1").Value = _ Sheets("Sheet1").Range("A1").Value + 1 For other ways to do this or if this is going to be used in a temple have a look here http://www.mcgimpsey.com/excel/udfs/sequentialnums.html -- Paul B Always backup your data before trying something new Please post any response to the newsgroups so others...

I am using your instructions to create a page of tickets - the design has been created as a picture so I added a text box to "hold" the mail merge instructions but I keep getting the error message "You cannot include DATA, NEXT, NEXTIF, or SKIPIF fields in comments, headers, footers, footnotes or endnotes." I have not included any of these but I'm wondering if it's because I've attempted to insert it in a text box. Is there an easy way to do this? TIA

Thank you for these instructions!! I'm using them to auto number my son's baseball team raffle tickets which we hand numbered last year (UGH!). I followed the instructions exactly but for some reason the numbering is starting at 2 every time. I did deselect the checkbox about the column headers which seems the obvious culprit. Any ideas? I'm using Word on a PC. Thanks!!
My quick process involves setting up a row of plaques with a01, a02, a03, thru a09. Then copy the plaques to the clipboard. Run the REPLACE TEXT feature to replace "a" with "1". Move row down and paste clipboard back into page. Run REPLACE TEXT to replace "a" with "2". Repeat until I get all the numbers. It's faster than manually typing the numbers in but I know there's go to be someway of automating the process.
I use a template for all my drawings that includes a page number in the lower right hand corner (usually says "Page 1 of 4" for example). I usually edit this number manually, which is fine for documents with a small amount of pages, but if I'm working on a large document (50+ pages) and need to re-order some pages it means editing the page number on every page manually.
Tip  Follow the same steps (above) to create Request for Production or Request for Admissions. The only difference would be in Step 3, you would change the "rog" to "rpf" or "rfa". This will keep unique numbering schemes running in the same document. Therefore, you could have an Interrogatory No.1 as well as Request for Production No.1. Keep in mind that if you cut, copy or paste sequence codes, you'll need to select them and press F9 to update the field codes. They do not update automatically. raffle ticket numbering
×