The sequential numbers required for the stationery are typically prepared in a spreadsheet such as Microsoft Excel and then exported as a txt or csv file for use with the Data Merge palette. However, a free script called Indys Number Generator written by Stanislav Antos can create sequential numbers without having to open any spreadsheet software. The script has been available for some time but I feel it is a hidden gem and definitely worth discussing.

How do I set up the basic template for text numbering in Word 2008 for the Mac? Here is what is driving me nuts: I want to generate numbered lists - lots and lots of them. The first level numbered lines will have second level under them in many cases, also numbered and indented below the first level. The second level will also have third level under them, intended some more and also numbered. This "sort-of" works fine. It USED to work excellently. Here is what I do. I click the Numbering button in the Bullets and Numbering palette. The line indents and a 1) is aut...
CK Note: Word 2007 - 2013 interface has an different automatic numbering scheme which I have been told is much less subject to corruption. Microsoft Word 2010 Bible by Herb Tyson, MVP. However numbering is still very imperfect in these later versions. I still recommend following Shauna Kelly's step-by-step instructions (see above) if setting up numbering in a template or in a document likely to be heavily edited. If you start without doing this and end up with "spaghetti numbering," fixing it will be a very large chore!
If you are still reading this then perhaps you are looking for a simple and reliable way to number a couple of lists in a Word document. If you read John's article then you have already been informed that field numbering is simple and robust. If you are like 9 out of 10 Word users in my office then anything more than 1. space space Blah, blah "enter" 2. space space Blah, blah ... defies simple! If that applies to you, then the "SeqField Numbering" Add-In presented later in this page is for you. event ticket numbering

How do I set up the basic template for text numbering in Word 2008 for the Mac? Here is what is driving me nuts: I want to generate numbered lists - lots and lots of them. The first level numbered lines will have second level under them in many cases, also numbered and indented below the first level. The second level will also have third level under them, intended some more and also numbered. This "sort-of" works fine. It USED to work excellently. Here is what I do. I click the Numbering button in the Bullets and Numbering palette. The line indents and a 1) is aut...
Can anyone tell me what the maximum no. of worksheets is in Excel? Ton From Help...Limited by available memory (default is 3) -- HTH Nick Hodge Microsoft MVP - Excel Southampton, England nick_hodgeTAKETHISOUT@zen.co.uk.ANDTHIS "Ton" wrote in message news:EB5EE739-9250-4D83-AA7C-EE82C02C0AA3@microsoft.com... > Can anyone tell me what the maximum no. of worksheets is in Excel? The maximum number only depends on the amount of memory available. -- Best Regards Leo Heuser Followup to newsgroup only please. "Ton"
Perhaps your explanation already addresses this, but I can’t see it. Is there any way this script can be used for printing multiple-up in numeric sequence? For example, if I’m running 1000 postcards 4-up (on 250 sheets). I need the 4 cards on page 1 to be numbered 1, 251, 501, 751; then the 4 cards on page 2 numbered 2, 252, 502, 752; etc., so that when the sheets come out of the printer and are cut into 4, I have a stack of 1-250, a stack of 251-500, a stack of 501-750 and a stack of 751-1000.
An awesome new feature to has been introduced to Microsoft Publisher 2010 is the ability to use Data Sources to create "Catalogue Pages". This is like a Mail Merge for design documents. Now, I would have to agree that Publisher isn't the best graphic design program in the market. But it's certainly adequate for simple ticket designs — for example, for a school social. Let's say we want each ticket to have a unique number and an inspiration quote. This is all possible through Publisher and a data source, e.g. an Excel Spreadsheet.
As you can see, the sequence name can be most anything (e.g. mySeq, A, B, or Bob's_your_uncle). If you start a sequence with a new sequence name the numbering restarts with 1. Look at Mary's first chore in the right hand column. Here you see the reset switch \r1 was used. This switch directs Word to restart the sequence named "A" with "1" at this point.
Remember that you must update the values in the sheet if you want to continue the numbering series with the next batch of tickets. For instance, if you want your next batch of tickets to start with 112, you'd open the workbook and change the value 100 to 112, and update the remaining values accordingly. Don't forget to save the workbook after updating the values.
If you need to apply numbering within a paragraph rather than to the entire paragraph, you use Word's ListNum feature. Using the ListNum feature will allow you to take advantage of the numbering system you're currently using in your document (it will use the one you implemented most recently if you're not currently using a numbering system). The ListNum Field is available in Word 97 and later and interacts with multi-level list numbering (which should be linked to styles as set forth here). Here is a brief explanation of differences between the ListNum field and the Seq field.
Add specific codes to coupons to track customer responses     Use different codes for your different marketing messages, advertisements, or promotions. These codes will enable you to keep track of how customers learned about your offer. The more you learn about who is drawn to your business and what attracts customers' attention, the better you can focus future marketing efforts.
Instead of working harder than you need to, insert a one-column table with as many rows as necessary to accommodate your list. Then, using Word's numbering feature, number that column. Finally, convert the table to text. The resulting list is a fixed numbered list, so you'll have to live with its limitations; when you can do so, this method definitely beats most alternative solutions.
I would like to number a voucher book, i have place 4 vouchers on a page, the thing is that i want each of these vouchers to start with different number, 100, 200, 300, 400, and then i want to number them 99 times. The problem is that they have to be numbered only 1 per page, so that when i have printed them all i can easily crop them and staple them right up with having to go through it all.
I am curently working on a larger projekt, where we have aprox. 4500 pcs.of furnituer designed in 4 different kind of families, generic, furnituer, furnituer systems and specialty equipment. We need to be able to asign every  pcs.of funituer a seqventual serial number, we have tried to do this using an extension with a funktion called element positionerning, but we have had no success with this tool, apparently it is taking up to much memory.
A note about link exchanges. This site does not participate in link exchanges to build web presence. If you have a link that you think would be of use to people reading this page, please send it to the webmaster with the url of the page where you think it should appear and it will be considered. Your placing a link to this site will not affect the decision on whether to add your link, though.

Hi Silver, Try going to File/Page Setup/Header-Footer/Custom Header/Should be the button shown in the header box with the # sign in it. Larry -- keithl816 ------------------------------------------------------------------------ keithl816's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=21287 View this thread: http://www.excelforum.com/showthread.php?threadid=498476 ...

The auto-indenting feature of bullets and lists has always frustrated me. EVERY time you apply a numbered or bulleted list, you've got to set the indents. I want my lists to be indented at the very left of the page, flush with the rest of the paragraphs. But no, Microsoft insists that you want them indented by 0.63cm and hanging at 1.27cm (WHY 0.63? Why not 0.7? Or 1.0cm? But that's a question for a different session.) (I know, it's because MS is American and still uses inches etc...)
To use mail merge to create a batch of gift certificates or coupons with tracking numbers, you need to set up a data source that contains a column listing the tracking numbers. If you plan to add only the tracking numbers to your publications, create a data source for the tracking numbers. If you also plan to use mail merge to insert additional information into your publications, such as customer names or addresses, you can add the column of tracking numbers to a data source that also lists the name and address data that you want to use.
Budget is our income and sometimes this is positive. I need to make this column in a query all negitive values. I am using the IIf function but it is not working. Budget: [budget_amount] IIf ([budget_amount] >=0, [budget_amount]*-1, [budget_amount]) or is there another function I could use? On Mon, 29 Oct 2007 19:18:00 -0700, Tamm Fox wrote: > Budget is our income and sometimes this is positive. I need to make this > column in a query all negitive values. > > I am using the IIf function but it is not working. > > Budget: [budget_amount] IIf ([budget_amount] &g...

For the calendar job, I've used two master layers and four local layers. To create a master layer, click the New Master Layer (all pages) button at the bottom of the Object Manager docker. Objects placed on this master layer will appear on all pages of your design. Then, create the required number of regular or local layers (in this case, four) by clicking the New Layer button. You now have one page ready.
Remember that you must update the values in the sheet if you want to continue the numbering series with the next batch of tickets. For instance, if you want your next batch of tickets to start with 112, you'd open the workbook and change the value 100 to 112, and update the remaining values accordingly. Don't forget to save the workbook after updating the values.
CK Note: Word 2007 - 2013 interface has an different automatic numbering scheme which I have been told is much less subject to corruption. Microsoft Word 2010 Bible by Herb Tyson, MVP. However numbering is still very imperfect in these later versions. I still recommend following Shauna Kelly's step-by-step instructions (see above) if setting up numbering in a template or in a document likely to be heavily edited. If you start without doing this and end up with "spaghetti numbering," fixing it will be a very large chore!
This chapter (web page) takes you through how numbering is supposed to work in Word and the various controls. It is useful, but primarily on SEQ fields and simple numbered lists and also as reference showing the menus, dialogs and controls and going through the concepts for outline numbering. To actually set up outline numbering that works, refer to the Kelly and McGhie articles.

Instead of working harder than you need to, insert a one-column table with as many rows as necessary to accommodate your list. Then, using Word's numbering feature, number that column. Finally, convert the table to text. The resulting list is a fixed numbered list, so you'll have to live with its limitations; when you can do so, this method definitely beats most alternative solutions.
I have been researching using sequential numbers for invoices an purchase orders, but all of them seem to advance the number eithe every time the document is opened or saved. My purchase order is par of a larger file, and since I will be opening and saving the fil without necessarily writing a purchase order I need more control ove its advancement. I was wondering how I could create a button that whe pressed or selected would advance the number by 1? Also, how could make it create a unique number depending on who's creating the purchas order. For example, let's say the user is ...
This tip was very helpful. Now I have been able to automatically number dozens of examples in a linguistics paper, and as I revise the paper and insert new examples between the existing examples, the numbering is automatically adjusted. Now the next step is how to use bookmarks for the references to the examples in the text of the paper. The references need to point to specific examples, and need to be automatically adjusted when the numbering of examples is adjusted. Any ideas on how to do this?

Hi, As a new user to excel I am thinking of setting up a data base of my music. The total number of tracks is in excess of 70,000. I have seen a simple solution using excel which would be ok but I'm not sure if I can have 70,000 rows in one work sheet. A friend has suggested access which I am not familiar with and don't know if this will allow 70,000 entries. Can anyone please tell me what the maximum numbers are in both access and excel 2003. Cheers Glinty Max in Excel 2003 is 65536 (in one sheet) whereas Access only limit is your memory -- Regards, Peo Sjoblom ...


I am curently working on a larger projekt, where we have aprox. 4500 pcs.of furnituer designed in 4 different kind of families, generic, furnituer, furnituer systems and specialty equipment. We need to be able to asign every  pcs.of funituer a seqventual serial number, we have tried to do this using an extension with a funktion called element positionerning, but we have had no success with this tool, apparently it is taking up to much memory.
Budget is our income and sometimes this is positive. I need to make this column in a query all negitive values. I am using the IIf function but it is not working. Budget: [budget_amount] IIf ([budget_amount] >=0, [budget_amount]*-1, [budget_amount]) or is there another function I could use? On Mon, 29 Oct 2007 19:18:00 -0700, Tamm Fox wrote: > Budget is our income and sometimes this is positive. I need to make this > column in a query all negitive values. > > I am using the IIf function but it is not working. > > Budget: [budget_amount] IIf ([budget_amount] &g...
The auto-indenting feature of bullets and lists has always frustrated me. EVERY time you apply a numbered or bulleted list, you've got to set the indents. I want my lists to be indented at the very left of the page, flush with the rest of the paragraphs. But no, Microsoft insists that you want them indented by 0.63cm and hanging at 1.27cm (WHY 0.63? Why not 0.7? Or 1.0cm? But that's a question for a different session.) (I know, it's because MS is American and still uses inches etc...)
The next step is to create the simple Excel workbook that contains the ticket numbers. Open a blank Excel sheet. Using Figure B as a guide, create the ticket numbering sheet and save it, making sure to note the new workbook's name and location. As we discussed earlier, the Excel workbook stores the ticket numbers. In this example, we'll create 11 tickets numbered 100 through 110. You'll need to update the ticket values for each merge.
×