Good morning! Directions are clear for sure but when i go to merge the first ticket is one but the second number on the raffle ticket is two. i have four raffle tickets per page the first three are messed up but the forth is correct all the way down to 500. Any ideas? i have tried with a header and without a header. i even made the first number with a formula. it does work with out putting next record but like you said it is four tickets with the same number and that would use a ton of ink. Any help would be greatly appreciated.
Another master layer is created for the names of the weekdays, which are also common to all pages. The sequential position of the background and the weekdays is different, which is why two master layers are needed. The weekdays layer is sixth from the bottom in the sequence of layers. This master layer must be placed on top of all layers (Figure 9).
If you start to type in what appears to be a numbered list, Word formats your manually typed "numbers" to an automatic numbered list. The main benefit of this option is that you do not need to click any button to start numbering and you can choose your numbering style as well. For example, if you type "(a) some text" and press Enter, it starts numbering using the "(a)" format.
So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.
Tip: Normally, the visibility and printability should be enabled or disabled together. Remember, a visible layer cannot be printed or exported if printability is disabled, and a non-visible layer can be printed and exported if printability is enabled. A layer that is visible but non-printable can be used to keep notes with the file. I use such a layer to keep the print details and other job information, so that I can refer to them at any time.
Hi everybody. I am having a problem with a query that I am working on. I have a table containing customer names, trade dates, and dollar amounts. Customers can have multiple trades on the same day, sometimes even the same dollar amount. I want to have the table sorted by name, date, then dollars so the query pulls everything in from lowest/earliest to highest/latest. I was trying to make a query that pulled in the customer name and trade dates, then added a new column called "Row" that had the record number. I want the query to show all names and dates, since there are ...
I have been researching using sequential numbers for invoices an purchase orders, but all of them seem to advance the number eithe every time the document is opened or saved. My purchase order is par of a larger file, and since I will be opening and saving the fil without necessarily writing a purchase order I need more control ove its advancement. I was wondering how I could create a button that whe pressed or selected would advance the number by 1? Also, how could make it create a unique number depending on who's creating the purchas order. For example, let's say the user is ...
Instead of working harder than you need to, insert a one-column table with as many rows as necessary to accommodate your list. Then, using Word's numbering feature, number that column. Finally, convert the table to text. The resulting list is a fixed numbered list, so you'll have to live with its limitations; when you can do so, this method definitely beats most alternative solutions.
You may wonder whether typing 1, 2, and 3 would be easier than using the ListNum field. Although doing that may be easier initially, the value of using the ListNum field becomes apparent when you cut and paste. When a paragraph contains multiple numbered items that you move or delete, Word automatically updates the ListNum fields. Using ListNum fields assures you of accurate numbering within a paragraph throughout the document.

Word's Numbering Explained by John McGhie, MVP - comprehensive and not pretty (Downloadable pdf file in letter size) - Reading this is vital to anyone attempting to use automatic numbering or bullets in a law office setting or other places where the documents are likely to be reused or heavily edited. See also How to Create a Template with a downloadable template with style-based numbering. I strongly recommend that you read both of these before doing anything with the contents of this chapter.
Thank you for these clear instructions. I have had the same problem as Mommy Vaughan and followed the suggestion. However, on re-opening the Word document, I have the dialogue box Invalid Merge Field. I have to use Task Manager to close down Word. I am using Word 2010. Maybe that is part or all of the problem. Any ideas please? I need to sort this by tomorrow night to print them on Monday!
Hello, I'm looking for a way to quickly find what numbers are missing in column B. I can sort them ascending, but how do I find if there are missing numbers? 1 2 3 5 6 7 9 I need to know 4 and 8 are missing. Thank you. One way: select B2:Bx. Choose Format/Conditional Formatting... CF1: Formula is =(B2-B1)>1 Format1: / or, without sorting, select column B (with B1 active): CF1: Formula is =AND(B1>MIN(B:B),COUNTIF(B:B,B1-1)=0) Both CF's will activate if there are missing numbers before them. In article <28706E9E-2624...

As you can see, the sequence name can be most anything (e.g. mySeq, A, B, or Bob's_your_uncle). If you start a sequence with a new sequence name the numbering restarts with 1. Look at Mary's first chore in the right hand column. Here you see the reset switch \r1 was used. This switch directs Word to restart the sequence named "A" with "1" at this point.
It's easy to enter a SEQ field manually. Begin by pressing [Ctrl]+[F9]. When Word displays the blank field, enter seq list1, as shown in Figure A. List1 is a required argument; you can use any descriptive name you like as long as it begins with an alpha character. The parentheses distinguish the numbers within the text. They're not part of the field code. Highlight the field code and press [F9] to display the field's value. As you can see in Figure B, the first field returns (1).
Is there a way to auto number files with the file number (less .jpeg) and save without having to let my computer grind to a halt, as it does using Automate, contact sheet. The objective is to create a preview set for distribution to clients with the file number annotated at bottom centre. Also, is there any way of creating the text/font/colour/stroke of my choice?
Tip: Normally, the visibility and printability should be enabled or disabled together. Remember, a visible layer cannot be printed or exported if printability is disabled, and a non-visible layer can be printed and exported if printability is enabled. A layer that is visible but non-printable can be used to keep notes with the file. I use such a layer to keep the print details and other job information, so that I can refer to them at any time.
I would like to number a voucher book, i have place 4 vouchers on a page, the thing is that i want each of these vouchers to start with different number, 100, 200, 300, 400, and then i want to number them 99 times. The problem is that they have to be numbered only 1 per page, so that when i have printed them all i can easily crop them and staple them right up with having to go through it all.
Thank you for these clear instructions. I have had the same problem as Mommy Vaughan and followed the suggestion. However, on re-opening the Word document, I have the dialogue box Invalid Merge Field. I have to use Task Manager to close down Word. I am using Word 2010. Maybe that is part or all of the problem. Any ideas please? I need to sort this by tomorrow night to print them on Monday!

If the second number on your raffle ticket is one higher than the first number, you must have accidentally put the <> tag after the first number (causing the next number, on the same ticket, to increase by one). You only need the <> after the second number on each ticket, so the next ticket gets a new number. (But you don't need it on the final ticket on the **page**, because the next **page** automatically gets a new number)

Hello Bruce, I seem to be having a different problem altogether. I created my ticket in word using logos and text boxes as needed, ticket looks great. I followed your very clear instructions but when I did the Finish & Merge I got this message, "You cannot include DATA, NEXT, NEXTIF, or SKIPIF fields in comments, headers, footers, footnotes or endnotes." I then click on OK and get this, "A field calculation error occurred in record 1. Bruce any help would be much appreciated. Thank you!!
I would like to number a voucher book, i have place 4 vouchers on a page, the thing is that i want each of these vouchers to start with different number, 100, 200, 300, 400, and then i want to number them 99 times. The problem is that they have to be numbered only 1 per page, so that when i have printed them all i can easily crop them and staple them right up with having to go through it all.
×